In an attempt to improve my NN system I have recently been thinking of some possibly useful tweaks to the data destined to be the input for the system. Long time readers of this blog will know that the NN system has been trained on my "idealised" data, a typical example of which might look like the red "price series" in the chart below.

These "idealised" series are modelled as simple combinations of linear trend plus a dominant cycle, represented above by the green sine wave at the bottom of the chart. For NN training purposes a mass of training data was created by phase shifting the sine wave and altering the linear trend. However, real data is much more like the cyan "price series," which is modelled as a combination of the linear trend, the dominant or "major" green cycle and a "minor" cyan cycle. It would be possible to create additional NN training data by creating numerous training series comprised of two cycles plus trend, but due to the curse of dimensionality that way madness lies, in addition to the inordinate amount of time it would take to train the NNs.

So the problem becomes one of finding a principled method of transforming the cyan "real data" to be more like the "idealised" red data my NNs were trained on, and a possible answer might be the use of my bandpass indicator. Shown below is a chart of said bandpass indicator overlaid on the above chart, in yellow. The bandpass is set to pass only the "minor" cycle and then this is subtracted from the "real data" to give an

approximation of the red "idealised" data. This particular instance calculates the bandpass with a moving window with a look back length set to the period of the "minor" cycle, whilst the following is a fully recursive implementation. It can be seen that this

recursive implementation is much better on this contrived toy example. However, I think this method shows promise and I intend to pursue it further. More in due course.

## Monday, 17 June 2013

## Tuesday, 11 June 2013

### Random Permutation of Price Series

As a prelude to the tests mentioned in my previous post it has been necessary to write code to randomly permute price data, and in the code box below is the Octave .oct file I have written to do this.

where the yellow is the real ( in this case S & P 500 ) data and the red and blue bars are a typical example of a single permutation run. This next screen shot shows that part of the above where the two series overlap on the right hand side, so that the details can be visually compared.

The purpose and necessity for this will be explained in a future post, where the planned tests will be discussed in more detail.

```
#include octave oct.h
#include octave dcolvector.h
#include math.h
#include algorithm
#include "MersenneTwister.h"
DEFUN_DLD (randomised_price_data, args, , "Inputs are OHLC column vectors and tick size. Output is permuted synthetic OHLC")
{
octave_value_list retval_list ;
int nargin = args.length () ;
int vec_length = args(0).length () - 1 ;
if ( nargin != 5 )
{
error ("Invalid arguments. Inputs are OHLC column vectors and tick size.") ;
return retval_list ;
}
if (args(0).length () < 50)
{
error ("Invalid arguments. Inputs are OHLC column vectors and tick size.") ;
return retval_list ;
}
if (error_state)
{
error ("Invalid arguments. Inputs are OHLC column vectors and tick size.") ;
return retval_list ;
}
ColumnVector open = args(0).column_vector_value () ; // open vector
ColumnVector high = args(1).column_vector_value () ; // high vector
ColumnVector low = args(2).column_vector_value () ; // low vector
ColumnVector close = args(3).column_vector_value () ; // close vector
double tick = args(4).double_value(); // Tick size
//double trend_increment = ( close ( args(3).length () - 1 ) - close (0) ) / ( args(3).length () - 1 ) ;
ColumnVector open_change_var ( vec_length ) ;
ColumnVector high_change_var ( vec_length ) ;
ColumnVector low_change_var ( vec_length ) ;
ColumnVector close_change_var ( vec_length ) ;
// variables for shuffling
double temp ;
int k1 ;
int k2 ;
// Check for negative or zero price values due to continuous back- adjusting of price series & compensate if necessary
// Note: the "&" below acts as Address-of operator: p = &x; Read: Assign to p (a pointer) the address of x.
double lowest_low = *std::min_element( &low(0), &low(low.length()) ) ;
double correction_factor = 0.0 ;
if ( lowest_low <= 0.0 )
{
correction_factor = fabs(lowest_low) + tick;
for (octave_idx_type ii (0); ii < args(0).length (); ii++)
{
open (ii) = open (ii) + correction_factor;
high (ii) = high (ii) + correction_factor;
low (ii) = low (ii) + correction_factor;
close (ii) = close (ii) + correction_factor;
}
}
// fill the change vectors with their values
for ( octave_idx_type ii (1) ; ii < args(0).length () ; ii++ )
{
// comment out/uncomment depending on whether to include a relationship to previous bar's volatility or not
// No relationship
// open_change_var (ii-1) = log10( open (ii) / close (ii) ) ;
// high_change_var (ii-1) = log10( high (ii) / close (ii) ) ;
// low_change_var (ii-1) = log10( low (ii) / close (ii) ) ;
// some relationship
open_change_var (ii-1) = ( close (ii) - open (ii) ) / ( high (ii-1) - low (ii-1) ) ;
high_change_var (ii-1) = ( close (ii) - high (ii) ) / ( high (ii-1) - low (ii-1) ) ;
low_change_var (ii-1) = ( close (ii) - low (ii) ) / ( high (ii-1) - low (ii-1) ) ;
close_change_var (ii-1) = log10( close(ii) / close(ii-1) ) ;
}
// Shuffle the log vectors
MTRand mtrand1 ; // Declare the Mersenne Twister Class - will seed from system time
k1 = vec_length - 1 ; // initialise prior to shuffling
while ( k1 > 0 ) // While at least 2 left to shuffle
{
k2 = mtrand1.randInt( k1 ) ; // Pick an int from 0 through k1
if ( k2 > k1 ) // check if random vector index no. k2 is > than max vector index - should never happen
{
k2 = k1 - 1 ; // But this is cheap insurance against disaster if it does happen
}
temp = open_change_var (k1) ; // allocate the last vector index content to temp
open_change_var (k1) = open_change_var (k2) ; // allocate random pick to the last vector index
open_change_var (k2) = temp ; // allocate temp content to old vector index position of random pick
temp = high_change_var (k1) ; // allocate the last vector index content to temp
high_change_var (k1) = high_change_var (k2) ; // allocate random pick to the last vector index
high (k2) = temp ; // allocate temp content to old vector index position of random pick
temp = low_change_var (k1) ; // allocate the last vector index content to temp
low_change_var (k1) = low_change_var (k2) ; // allocate random pick to the last vector index
low_change_var (k2) = temp ; // allocate temp content to old vector index position of random pick
temp = close_change_var (k1) ; // allocate the last vector index content to temp
close_change_var (k1) = close_change_var (k2) ; // allocate random pick to the last vector index
close_change_var (k2) = temp ; // allocate temp content to old vector index position of random pick
k1 = k1 - 1 ; // count down
} // Shuffling is complete when this while loop exits
// create the new shuffled price series and round to nearest tick
for ( octave_idx_type ii (1) ; ii < args(0).length () ; ii++ )
{
close (ii) = ( floor( ( close (ii-1) * pow( 10, close_change_var(ii-1) ) ) / tick + 0.5 ) ) * tick ;
// comment out/uncomment depending on whether to include a relationship to previous bar's volatility or not
// no relationship
// open (ii) = ( floor( ( close (ii) * pow( 10, open_change_var(ii-1) ) ) / tick + 0.5 ) ) * tick ;
// high (ii) = ( floor( ( close (ii) * pow( 10, high_change_var(ii-1) ) ) / tick + 0.5 ) ) * tick ;
// low (ii) = ( floor( ( close (ii) * pow( 10, low_change_var(ii-1) ) ) / tick + 0.5 ) ) * tick ;
// some relationship
open (ii) = ( floor( ( open_change_var(ii-1) * ( high (ii-1) - low (ii-1) ) + close (ii) ) / tick + 0.5 ) ) * tick ;
high (ii) = ( floor( ( high_change_var(ii-1) * ( high (ii-1) - low (ii-1) ) + close (ii) ) / tick + 0.5 ) ) * tick ;
low (ii) = ( floor( ( low_change_var(ii-1) * ( high (ii-1) - low (ii-1) ) + close (ii) ) / tick + 0.5 ) ) * tick ;
}
// if compensation due to negative or zero original price values due to continuous back- adjusting of price series took place, re-adjust
if ( correction_factor != 0.0 )
{
for ( octave_idx_type ii (0); ii < args(0).length () ; ii++ )
{
open (ii) = open (ii) - correction_factor ;
high (ii) = high (ii) - correction_factor ;
low (ii) = low (ii) - correction_factor ;
close (ii) = close (ii) - correction_factor ;
}
}
retval_list (3) = close ;
retval_list (2) = low ;
retval_list (1) = high ;
retval_list (0) = open ;
return retval_list ;
} // end of function
```

The function can be compiled in two slightly different versions by commenting/commenting out some indicated code:- this makes it possible to choose between having more or less dependency between adjacent bars based on the range of the first bar. For completeness the required header file for the Mersenne Twister algorithm is given next```
// MersenneTwister.h
// Mersenne Twister random number generator -- a C++ class MTRand
// Based on code by Makoto Matsumoto, Takuji Nishimura, and Shawn Cokus
// Richard J. Wagner v1.1 28 September 2009 wagnerr@umich.edu
// The Mersenne Twister is an algorithm for generating random numbers. It
// was designed with consideration of the flaws in various other generators.
// The period, 2^19937-1, and the order of equidistribution, 623 dimensions,
// are far greater. The generator is also fast; it avoids multiplication and
// division, and it benefits from caches and pipelines. For more information
// see the inventors' web page at
// http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/emt.html
// Reference
// M. Matsumoto and T. Nishimura, "Mersenne Twister: A 623-Dimensionally
// Equidistributed Uniform Pseudo-Random Number Generator", ACM Transactions on
// Modeling and Computer Simulation, Vol. 8, No. 1, January 1998, pp 3-30.
// Copyright (C) 1997 - 2002, Makoto Matsumoto and Takuji Nishimura,
// Copyright (C) 2000 - 2009, Richard J. Wagner
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. The names of its contributors may not be used to endorse or promote
// products derived from this software without specific prior written
// permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
// The original code included the following notice:
//
// When you use this, send an email to: m-mat@math.sci.hiroshima-u.ac.jp
// with an appropriate reference to your work.
//
// It would be nice to CC: wagnerr@umich.edu and Cokus@math.washington.edu
// when you write.
#ifndef MERSENNETWISTER_H
#define MERSENNETWISTER_H
// Not thread safe (unless auto-initialization is avoided and each thread has
// its own MTRand object)
#include
```
#include
#include
#include
#include
class MTRand {
// Data
public:
typedef unsigned long uint32; // unsigned integer type, at least 32 bits
enum { N = 624 }; // length of state vector
enum { SAVE = N + 1 }; // length of array for save()
protected:
enum { M = 397 }; // period parameter
uint32 state[N]; // internal state
uint32 *pNext; // next value to get from state
int left; // number of values left before reload needed
// Methods
public:
MTRand( const uint32 oneSeed ); // initialize with a simple uint32
MTRand( uint32 *const bigSeed, uint32 const seedLength = N ); // or array
MTRand(); // auto-initialize with /dev/urandom or time() and clock()
MTRand( const MTRand& o ); // copy
// Do NOT use for CRYPTOGRAPHY without securely hashing several returned
// values together, otherwise the generator state can be learned after
// reading 624 consecutive values.
// Access to 32-bit random numbers
uint32 randInt(); // integer in [0,2^32-1]
uint32 randInt( const uint32 n ); // integer in [0,n] for n < 2^32
double rand(); // real number in [0,1]
double rand( const double n ); // real number in [0,n]
double randExc(); // real number in [0,1)
double randExc( const double n ); // real number in [0,n)
double randDblExc(); // real number in (0,1)
double randDblExc( const double n ); // real number in (0,n)
double operator()(); // same as rand()
// Access to 53-bit random numbers (capacity of IEEE double precision)
double rand53(); // real number in [0,1)
// Access to nonuniform random number distributions
double randNorm( const double mean = 0.0, const double stddev = 1.0 );
// Re-seeding functions with same behavior as initializers
void seed( const uint32 oneSeed );
void seed( uint32 *const bigSeed, const uint32 seedLength = N );
void seed();
// Saving and loading generator state
void save( uint32* saveArray ) const; // to array of size SAVE
void load( uint32 *const loadArray ); // from such array
friend std::ostream& operator<<( std::ostream& os, const MTRand& mtrand );
friend std::istream& operator>>( std::istream& is, MTRand& mtrand );
MTRand& operator=( const MTRand& o );
protected:
void initialize( const uint32 oneSeed );
void reload();
uint32 hiBit( const uint32 u ) const { return u & 0x80000000UL; }
uint32 loBit( const uint32 u ) const { return u & 0x00000001UL; }
uint32 loBits( const uint32 u ) const { return u & 0x7fffffffUL; }
uint32 mixBits( const uint32 u, const uint32 v ) const
{ return hiBit(u) | loBits(v); }
uint32 magic( const uint32 u ) const
{ return loBit(u) ? 0x9908b0dfUL : 0x0UL; }
uint32 twist( const uint32 m, const uint32 s0, const uint32 s1 ) const
{ return m ^ (mixBits(s0,s1)>>1) ^ magic(s1); }
static uint32 hash( time_t t, clock_t c );
};
// Functions are defined in order of usage to assist inlining
inline MTRand::uint32 MTRand::hash( time_t t, clock_t c )
{
// Get a uint32 from t and c
// Better than uint32(x) in case x is floating point in [0,1]
// Based on code by Lawrence Kirby (fred@genesis.demon.co.uk)
static uint32 differ = 0; // guarantee time-based seeds will change
uint32 h1 = 0;
unsigned char *p = (unsigned char *) &t;
for( size_t i = 0; i < sizeof(t); ++i )
{
h1 *= UCHAR_MAX + 2U;
h1 += p[i];
}
uint32 h2 = 0;
p = (unsigned char *) &c;
for( size_t j = 0; j < sizeof(c); ++j )
{
h2 *= UCHAR_MAX + 2U;
h2 += p[j];
}
return ( h1 + differ++ ) ^ h2;
}
inline void MTRand::initialize( const uint32 seed )
{
// Initialize generator state with seed
// See Knuth TAOCP Vol 2, 3rd Ed, p.106 for multiplier.
// In previous versions, most significant bits (MSBs) of the seed affect
// only MSBs of the state array. Modified 9 Jan 2002 by Makoto Matsumoto.
register uint32 *s = state;
register uint32 *r = state;
register int i = 1;
*s++ = seed & 0xffffffffUL;
for( ; i < N; ++i )
{
*s++ = ( 1812433253UL * ( *r ^ (*r >> 30) ) + i ) & 0xffffffffUL;
r++;
}
}
inline void MTRand::reload()
{
// Generate N new values in state
// Made clearer and faster by Matthew Bellew (matthew.bellew@home.com)
static const int MmN = int(M) - int(N); // in case enums are unsigned
register uint32 *p = state;
register int i;
for( i = N - M; i--; ++p )
*p = twist( p[M], p[0], p[1] );
for( i = M; --i; ++p )
*p = twist( p[MmN], p[0], p[1] );
*p = twist( p[MmN], p[0], state[0] );
left = N, pNext = state;
}
inline void MTRand::seed( const uint32 oneSeed )
{
// Seed the generator with a simple uint32
initialize(oneSeed);
reload();
}
inline void MTRand::seed( uint32 *const bigSeed, const uint32 seedLength )
{
// Seed the generator with an array of uint32's
// There are 2^19937-1 possible initial states. This function allows
// all of those to be accessed by providing at least 19937 bits (with a
// default seed length of N = 624 uint32's). Any bits above the lower 32
// in each element are discarded.
// Just call seed() if you want to get array from /dev/urandom
initialize(19650218UL);
register int i = 1;
register uint32 j = 0;
register int k = ( N > seedLength ? N : seedLength );
for( ; k; --k )
{
state[i] =
state[i] ^ ( (state[i-1] ^ (state[i-1] >> 30)) * 1664525UL );
state[i] += ( bigSeed[j] & 0xffffffffUL ) + j;
state[i] &= 0xffffffffUL;
++i; ++j;
if( i >= N ) { state[0] = state[N-1]; i = 1; }
if( j >= seedLength ) j = 0;
}
for( k = N - 1; k; --k )
{
state[i] =
state[i] ^ ( (state[i-1] ^ (state[i-1] >> 30)) * 1566083941UL );
state[i] -= i;
state[i] &= 0xffffffffUL;
++i;
if( i >= N ) { state[0] = state[N-1]; i = 1; }
}
state[0] = 0x80000000UL; // MSB is 1, assuring non-zero initial array
reload();
}
inline void MTRand::seed()
{
// Seed the generator with an array from /dev/urandom if available
// Otherwise use a hash of time() and clock() values
// First try getting an array from /dev/urandom
FILE* urandom = fopen( "/dev/urandom", "rb" );
if( urandom )
{
uint32 bigSeed[N];
register uint32 *s = bigSeed;
register int i = N;
register bool success = true;
while( success && i-- )
success = fread( s++, sizeof(uint32), 1, urandom );
fclose(urandom);
if( success ) { seed( bigSeed, N ); return; }
}
// Was not successful, so use time() and clock() instead
seed( hash( time(NULL), clock() ) );
}
inline MTRand::MTRand( const uint32 oneSeed )
{ seed(oneSeed); }
inline MTRand::MTRand( uint32 *const bigSeed, const uint32 seedLength )
{ seed(bigSeed,seedLength); }
inline MTRand::MTRand()
{ seed(); }
inline MTRand::MTRand( const MTRand& o )
{
register const uint32 *t = o.state;
register uint32 *s = state;
register int i = N;
for( ; i--; *s++ = *t++ ) {}
left = o.left;
pNext = &state[N-left];
}
inline MTRand::uint32 MTRand::randInt()
{
// Pull a 32-bit integer from the generator state
// Every other access function simply transforms the numbers extracted here
if( left == 0 ) reload();
--left;
register uint32 s1;
s1 = *pNext++;
s1 ^= (s1 >> 11);
s1 ^= (s1 << 7) & 0x9d2c5680UL;
s1 ^= (s1 << 15) & 0xefc60000UL;
return ( s1 ^ (s1 >> 18) );
}
inline MTRand::uint32 MTRand::randInt( const uint32 n )
{
// Find which bits are used in n
// Optimized by Magnus Jonsson (magnus@smartelectronix.com)
uint32 used = n;
used |= used >> 1;
used |= used >> 2;
used |= used >> 4;
used |= used >> 8;
used |= used >> 16;
// Draw numbers until one is found in [0,n]
uint32 i;
do
i = randInt() & used; // toss unused bits to shorten search
while( i > n );
return i;
}
inline double MTRand::rand()
{ return double(randInt()) * (1.0/4294967295.0); }
inline double MTRand::rand( const double n )
{ return rand() * n; }
inline double MTRand::randExc()
{ return double(randInt()) * (1.0/4294967296.0); }
inline double MTRand::randExc( const double n )
{ return randExc() * n; }
inline double MTRand::randDblExc()
{ return ( double(randInt()) + 0.5 ) * (1.0/4294967296.0); }
inline double MTRand::randDblExc( const double n )
{ return randDblExc() * n; }
inline double MTRand::rand53()
{
uint32 a = randInt() >> 5, b = randInt() >> 6;
return ( a * 67108864.0 + b ) * (1.0/9007199254740992.0); // by Isaku Wada
}
inline double MTRand::randNorm( const double mean, const double stddev )
{
// Return a real number from a normal (Gaussian) distribution with given
// mean and standard deviation by polar form of Box-Muller transformation
double x, y, r;
do
{
x = 2.0 * rand() - 1.0;
y = 2.0 * rand() - 1.0;
r = x * x + y * y;
}
while ( r >= 1.0 || r == 0.0 );
double s = sqrt( -2.0 * log(r) / r );
return mean + x * s * stddev;
}
inline double MTRand::operator()()
{
return rand();
}
inline void MTRand::save( uint32* saveArray ) const
{
register const uint32 *s = state;
register uint32 *sa = saveArray;
register int i = N;
for( ; i--; *sa++ = *s++ ) {}
*sa = left;
}
inline void MTRand::load( uint32 *const loadArray )
{
register uint32 *s = state;
register uint32 *la = loadArray;
register int i = N;
for( ; i--; *s++ = *la++ ) {}
left = *la;
pNext = &state[N-left];
}
inline std::ostream& operator<<( std::ostream& os, const MTRand& mtrand )
{
register const MTRand::uint32 *s = mtrand.state;
register int i = mtrand.N;
for( ; i--; os << *s++ << "\t" ) {}
return os << mtrand.left;
}
inline std::istream& operator>>( std::istream& is, MTRand& mtrand )
{
register MTRand::uint32 *s = mtrand.state;
register int i = mtrand.N;
for( ; i--; is >> *s++ ) {}
is >> mtrand.left;
mtrand.pNext = &mtrand.state[mtrand.N-mtrand.left];
return is;
}
inline MTRand to standard forms
// - Cleaned declarations and definitions to please Intel compiler
// - Revised twist() operator to work on ones'-complement machines
// - Fixed reload() function to work when N and M are unsigned
// - Added copy constructor and copy operator from Salvador Espana

followed by a file to show how to use this header file.```
// example.cpp
// Examples of random number generation with MersenneTwister.h
// Richard J. Wagner 27 September 2009
#include iostream
```
#include fstream
#include "MersenneTwister.h"
using namespace std;
int main( int argc, char * const argv[] )
{
// A Mersenne Twister random number generator
// can be declared with a simple
MTRand mtrand1;
// and used with
double a = mtrand1();
// or
double b = mtrand1.rand();
cout << "Two real numbers in the range [0,1]: ";
cout << a << ", " << b << endl;
// Those calls produced the default of floating-point numbers
// in the range 0 to 1, inclusive. We can also get integers
// in the range 0 to 2^32 - 1 (4294967295) with
unsigned long c = mtrand1.randInt();
cout << "An integer in the range [0," << 0xffffffffUL;
cout << "]: " << c << endl;
// Or get an integer in the range 0 to n (for n < 2^32) with
int d = mtrand1.randInt( 42 );
cout << "An integer in the range [0,42]: " << d << endl;
// We can get a real number in the range 0 to 1, excluding
// 1, with
double e = mtrand1.randExc();
cout << "A real number in the range [0,1): " << e << endl;
// We can get a real number in the range 0 to 1, excluding
// both 0 and 1, with
double f = mtrand1.randDblExc();
cout << "A real number in the range (0,1): " << f << endl;
// The functions rand(), randExc(), and randDblExc() can
// also have ranges defined just like randInt()
double g = mtrand1.rand( 2.5 );
double h = mtrand1.randExc( 10.0 );
double i = 12.0 + mtrand1.randDblExc( 8.0 );
cout << "A real number in the range [0,2.5]: " << g << endl;
cout << "One in the range [0,10.0): " << h << endl;
cout << "And one in the range (12.0,20.0): " << i << endl;
// The distribution of numbers over each range is uniform,
// but it can be transformed to other useful distributions.
// One common transformation is included for drawing numbers
// in a normal (Gaussian) distribution
cout << "A few grades from a class with a 52 pt average ";
cout << "and a 9 pt standard deviation:" << endl;
for( int student = 0; student < 20; ++student )
{
double j = mtrand1.randNorm( 52.0, 9.0 );
cout << ' ' << int(j);
}
cout << endl;
// Random number generators need a seed value to start
// producing a sequence of random numbers. We gave no seed
// in our declaration of mtrand1, so one was automatically
// generated from the system clock (or the operating system's
// random number pool if available). Alternatively we could
// provide our own seed. Each seed uniquely determines the
// sequence of numbers that will be produced. We can
// replicate a sequence by starting another generator with
// the same seed.
MTRand mtrand2a( 1973 ); // makes new MTRand with given seed
double k1 = mtrand2a(); // gets the first number generated
MTRand mtrand2b( 1973 ); // makes an identical MTRand
double k2 = mtrand2b(); // and gets the same number
cout << "These two numbers are the same: ";
cout << k1 << ", " << k2 << endl;
// We can also restart an existing MTRand with a new seed
mtrand2a.seed( 1776 );
mtrand2b.seed( 1941 );
double l1 = mtrand2a();
double l2 = mtrand2b();
cout << "Re-seeding gives different numbers: ";
cout << l1 << ", " << l2 << endl;
// But there are only 2^32 possible seeds when we pass a
// single 32-bit integer. Since the seed dictates the
// sequence, only 2^32 different random number sequences will
// result. For applications like Monte Carlo simulation we
// might want many more. We can seed with an array of values
// rather than a single integer to access the full 2^19937-1
// possible sequences.
MTRand::uint32 seed[ MTRand::N ];
for( int n = 0; n < MTRand::N; ++n )
seed[n] = 23 * n; // fill with anything
MTRand mtrand3( seed );
double m1 = mtrand3();
double m2 = mtrand3();
double m3 = mtrand3();
cout << "We seeded this sequence with 19968 bits: ";
cout << m1 << ", " << m2 << ", " << m3 << endl;
// Again we will have the same sequence every time we run the
// program. Make the array with something that will change
// to get unique sequences. On a Linux system, the default
// auto-initialization routine takes a unique sequence from
// /dev/urandom.
// For cryptography, also remember to hash the generated
// random numbers. Otherwise the internal state of the
// generator can be learned after reading 624 values.
// We might want to save the state of the generator at an
// arbitrary point after seeding so a sequence could be
// replicated. An MTRand object can be saved into an array
// or to a stream.
MTRand mtrand4;
// The array must be of type uint32 and length SAVE.
MTRand::uint32 randState[ MTRand::SAVE ];
mtrand4.save( randState );
// A stream is convenient for saving to a file.
ofstream stateOut( "state.dat" );
if( stateOut )
{
stateOut << mtrand4;
stateOut.close();
}
unsigned long n1 = mtrand4.randInt();
unsigned long n2 = mtrand4.randInt();
unsigned long n3 = mtrand4.randInt();
cout << "A random sequence: "
<< n1 << ", " << n2 << ", " << n3 << endl;
// And loading the saved state is as simple as
mtrand4.load( randState );
unsigned long o4 = mtrand4.randInt();
unsigned long o5 = mtrand4.randInt();
unsigned long o6 = mtrand4.randInt();
cout << "Restored from an array: "
<< o4 << ", " << o5 << ", " << o6 << endl;
ifstream stateIn( "state.dat" );
if( stateIn )
{
stateIn >> mtrand4;
stateIn.close();
}
unsigned long p7 = mtrand4.randInt();
unsigned long p8 = mtrand4.randInt();
unsigned long p9 = mtrand4.randInt();
cout << "Restored from a stream: "
<< p7 << ", " << p8 << ", " << p9 << endl;
// We can also duplicate a generator by copying
MTRand mtrand5( mtrand3 ); // copy upon construction
double q1 = mtrand3();
double q2 = mtrand5();
cout << "These two numbers are the same: ";
cout << q1 << ", " << q2 << endl;
mtrand5 = mtrand4; // copy by assignment
double r1 = mtrand4();
double r2 = mtrand5();
cout << "These two numbers are the same: ";
cout << r1 << ", " << r2 << endl;
// In summary, the recommended common usage is
MTRand mtrand6; // automatically generate seed
double s = mtrand6(); // real number in [0,1]
double t = mtrand6.randExc(0.5); // real number in [0,0.5)
unsigned long u = mtrand6.randInt(10); // integer in [0,10]
// with the << and >> operators used for saving to and
// loading from streams if needed.
cout << "Your lucky number for today is "
<< s + t * u << endl;
return 0;
}

The function produces a permuted time series that preserves the trend of the original time series ( begins and ends with the same values for both the permuted and unpermuted data ) as can be seen in this screen shot of typical output, plotted using Gnuplot,where the yellow is the real ( in this case S & P 500 ) data and the red and blue bars are a typical example of a single permutation run. This next screen shot shows that part of the above where the two series overlap on the right hand side, so that the details can be visually compared.

The purpose and necessity for this will be explained in a future post, where the planned tests will be discussed in more detail.

Labels:
Gnuplot,
Monte Carlo Permutation,
Octave,
Synthetic Data

## Thursday, 6 June 2013

### First Version of Neural Net System Complete

I am pleased to say that my first NN "system" has now been sufficiently trained to subject it to testing. The system consists of my NN classifier, as mentioned in previous posts, along with a "directional" NN to indicate a long, short or neutral position bias. There are 205 separate NNs, 41 "classifying" NNs for measured cyclic periods of 10 to 50 inclusive, and for each period 5 "directional" NNs have been trained. The way these work is:

Below are shown some recent charts showing the "position bias" that results from the above. Blue is long, red is short and white is neutral.

- at each new bar the current dominant cycle period is measured, e.g 25 bars
- the "classifying" NN for period 25 is then run to determine the current "market mode," which will be one of my 5 postulated market types
- the "directional" NN for period 25 and the identified "market mode" is then run to assign a "position bias" for the most recent bar

Below are shown some recent charts showing the "position bias" that results from the above. Blue is long, red is short and white is neutral.

S & P 500

Gold

Treasury Bonds

Dollar Index

West Texas Oil

World Sugar

I intend these "position biases" to be a set up condition for use with a specific entry and exit logic. I now need to code this up and test it. The test I have in mind is a Monte Carlo Permutation test, which is nicely discussed in the Permutation Training section (page 306 onwards) in the Tutorial PDF available from the downloads page on the TSSB page.

I would stress that this is a first implementation of my NN trading system and I fully expect that it could be improved. However, before I undertake any more development I want to be sure that I am on the right track. My future work flow will be something like this:-

- code the above mentioned entry and exit logic
- code the MC test routine and conduct tests
- if these MC tests show promise, rewrite my Octave NN training code in C++ .oct code to speed up the NN training
- improve the classification NNs by increasing/varying the amount of training data, and possibly introducing new discriminant features
- do the same with the directional NNs

Subscribe to:
Posts (Atom)